#277/1A, Annamalai Industrial Park, Kalapatti, Coimbatore-641048
+91 75503 79111, 222, 333 sales@nagaimpex.com

cobralogo

Our Own Brand New DVR “COBRA DVR & CCTV CAMERAS”

About COBRA CCTV
We supply and install a full range of closed circuit TV systems for the protection of your premises. Day and night CCTV security cameras allow your CCTV system to be effective even in the lowest of light conditions, whilst still showing clear colour pictures during daylight hours. Day and night CCTV cameras will automatically change from colour images to night vision when the light levels drop below a certain level.

The footage from the cameras can either be downloaded directly to a video recorder or directly to a PC which can control time zones and motion detection so you only record when you need to.

SPECIFICATION

Specifications

1.4ch security cctv system
2.1pcs 4ch DVR
3.video power cable
4.Power and mouse

FEATURES

FEATURES

4 pcs indoor dome camera Color 1/4″ SONY 420TVL, 24pcs IR leds, Low Illumination, DWDR, OSD,DNR
1pc   4CH H.264 DVR with VGA, support mobile monitor
4pcs 10meter(65ft) video+power Cable
1pc   Power supply for 4 camera  12V DC 3A
1pc   1 metre crossed network patch lead
1pc   BNC to TV connector
1pc   DVR mouse
4pcs  CCTV Sign

CAMERA INFORMATION

Dome camera information

MODEL COBRA-100
Image Device 1/4″ SONY
TV Format PAL/NTSC
Number of Pixel NTSC: 510×492/ PAL: 628×582
Resolution 420 TV lines
Sync.System Internal
IR LED 24 units IR LEDs
IR Effective Range UP to 15 meters
Minimum Illumination 0LUX(IR ON)
LEN f3.6MM/6MM (F2.0)
AGC AUTO
S/N Ratio ≥48dB
Smart Light Control YES
Gain Control Auto
White Balance Auto(2500°K~9500°K)
Electronic Shutter Auto E Shutter:1/60(1/50)~1/100000Sec
Back light Compensation AUTO
Video Output 1.0Vp-p composite 75ohm
Power Consumption 300mA
Power Supply DC12V
Operation Temp -10°C~+50°C

 

DVR INFORMATION
DVR information

How to install dvr cctv system ?

This security system camera is suited used at outside, street, passageway, square, market, etc.

To install the camera you will need:

Phillips#2 screwdriver

Small balde screwdriver(for adjusting VF model cameras)

Depending on how the camera is mounted

you may also need:

Hammer

Drill with 3/32″ and 3/16″drill bits

3/4″hole saw

SCREENSHOTS
aaaa

 

cobradvr

factory1 factory2 prod certs

CONTACT INFO

FOR SALES ENQUIRIES 

Please Contact

HOTLINES :+91 9095266800, 11, 22

EMAIL : sales@nagaimpex.com